Barco DP2K SLP Series

R5906848 /04 DP2K SLP Series 279
A
B
C
C
1
2
Image 22-10
2. Fasten the top cover plate with four screws (reference 1 Image 22-11). Use a 3 mm Allen wrench.
1
Image 22-11
CAUTION: Opening the Light Processor compartment by removing the top cover plate or side cover
plate will result in a tamper event. An authorization to clear the security warning on the projector,
after closing off the Light Processor compartment, will be needed!
22.9 Installation of the left side cover
Required tools
Flat screwdriver 7 mm
How to install the left side cover?
1. Place the left side cover on the projector.
2. Fasten the five captive screws (reference 1 Image 22-12) of the left side cover using a 7 mm flat screwdriver.
Removal and installation of the projector covers