Barco DP2K SLP Series

R5906848 /04 DP2K SLP Series 183
1
2 1
Image 16-20
16.9 Installing the Lens Holder
Required tools
• 5mm Allen wrench.
• 5.5mm nut driver.
How to install the Lens Holder?
1. Place the Lens Holder on the projector chassis as illustrated and fasten with the 4 screws (reference 1
Image 16-21). Use a 5mm Allen wrench. Ensure to place a plain washer onto each screws (reference 2
Image 16-21).
Lens Holder