R5906848 /04 DP2K SLP Series 259
Image 19-10: Load and install software
7. Select the way the wizard will update the package. Check the desired radio button (14).
8. If automatically is selected the wizard will load the software in the oldest slot and install the software
immediately (15).
If custom update (for advanced users) is selected, the wizard displays the selection for slot A or slot B (16).
Check the radio button of your choice and press Next (17).
The software will be loaded to the selected slot and will be installed immediately
When the update is finished, an status window is displayed.
19.4 Link decryptor software update
How to update
1. Launch the DC Update Companion as described in “Software upgrade, launch DC update companion”, page
250.
2. Select package type. Click on the drop down box (1) and select Enigma Link Decryptor Package .
Software update via Communicator (DC update companion)
To Next Page
Loading...
Need help?
General
