R5906848 /04 DP2K SLP Series258
4. Browse for the desired file (5), select the file and click on Open (6).
The Package file name line is filled out (7).
5. Enter the device IP address (10) or click on Browse to open a device selection window (11).
Note: The IP of the connected projector is already filled out. When using the DC Update Companion
as stand alone program, then this field is blank.
Image 19-9: IP selection
6. Click Next to continue.
The necessary information is gathered.
The current installed version is shown next to the package version (13).
Software update via Communicator (DC update companion)
To Next Page
Loading...
Need help?
General
