Barco DP2K SLP Series Service Manual

91
About this chapter
This chapter describes how to maintain the liquid cooling circuit of the projector.
WARNING: All actions performed on the Liquid Cooling Circuit should occur in normal ambient
conditions (approximately 25 °C). The projector should have sufficiently cooled down (minimum 2
hours).
WARNING: Hazardous product: Blue antifreeze diluted 1,2 ethanediol (1/3 ethanediol – 2/3 Demi
water).
Not for household use. Keep out of reach of children. Harmful by oral intake. Avoid exposure to
pregnant women. Avoid contact with eyes, skin and clothing. Avoid inhalation of the noxious fumes.
WARNING: Only use Barco approved cooling liquid to refill the liquid cooling circuit of the projector.
Neglecting this may lead to irreversible damage of the projector.
Handling the cooling liquid
• Avoid contact of the liquid with Eyes, Skin and Clothing.
• Avoid inhaling of the noxious fumes.
• Conserve the product in the original package and in a well ventilated room.
Personal protection rules
• Handle the cooling liquid in a well ventilated room.
• Under no circumstances eat, drink and smoke while handling the liquid.
• Wear gloves (Butylrubber, PVC....) and Goggles.
• Wear suitable protection clothing.
Overview
•
Check cooling liquid level & cooling integrity
• Cooling liquid refill
R5906848 /04 DP2K SLP Series
Liquid cooling
circuit
8

Barco DP2K SLP Series Specifications

General

Brand	Barco
Model	DP2K SLP Series
Category	Projector
Language	English