Barco DP2K SLP Series Service Manual

R5906848 /04 DP2K SLP Series62
6
Image 7-5
5. Gently slide out the Light Source and remove it.
Image 7-6
7.3 Removal of the Controller assembly
Required tools
• Allen wrench 3 mm
• Flat screwdriver 7 mm
• Side cutter
How to remove the Controller assembly
1. Remove the Light Source Cover.
2. Cut the cable ties holding the Light Source wiring to the Controller assembly.
Laser Phosphor Light Source

Barco DP2K SLP Series Specifications

General

Brand	Barco
Model	DP2K SLP Series
Category	Projector
Language	English