137
of 174
Manual b maXX
®
BM1000
Document No. 5.07003.04
APPENDIX C -
DECLARATION OF CONFORMITY/
MANUFACTURER, UL - CERTIFICATION
In this section we provide general information about EU directives, the CE symbol and the
Declaration of Conformity/by Manufacturer.
C.1 What is an EU directive?
EU directives specify requirements. The directives are written by the relevant bodies with-
in the EU and are implemented by all the member countries of the EU in national law. In
this way the EU directives guarantee free trade within the EU.
An EU directive only contains essential minimum requirements. You will find detailed re-
quirements in standards, to which references are made in the directive.
C.2 What the CE symbol indicates
a) The CE marking symbolizes conformity to all the obligations incumbent on manufac-
turers for the product by virtue of the Community directives providing for its affixing.
…
b) The CE marking affixed to industrial products symbolizes the fact that the natural or
legal person having affixed or been responsible for the affixing of the said marking has
verified that the product conforms to all the Community total harmonization provisions
which apply to it and has been the subject of the appropriate conformity evaluation pro
-
cedures.
…
Council Decision 93/465/EEC, Annex I B. a) + c)
We affix the CE mark to the equipment and to the documentation as soon as we have
established that we have satisfied the requirements of the relevant directives.
All converters and control systems supplied by the Baumüller Nürnberg GmbH satisfy the
requirements of 73/23/EEC (Low Voltage Directive).
As all converters and control systems comply with the requirements of the harmonized
standards EN50178, EN 60204-1, EN 60529 and HD625.1 S1, the protection targets of
73/23/EWG are reached.
To Next Page
Loading...