23
of 174
Manual b maXX
®
BM1000
Document No. 5.07003.04
3TRANSPORTATION AND PACKING
In this chapter we describe, which conditions have to be adhered to at transportation, how
you check the device after receipt and what you should have to consider, if you dispose
the packing.
3.1 To be considered by transportation
For the first transportation of the device, the device was packed in the manufacturer com-
pany. In case you transport the device, assure, that the following conditions are fulfilled
during the whole transportation:
m -20°C to +60°C (temperature range)
m max. 1 g (vibration, shock, repetitive shock)
3.2 Unpacking
After receipt of the device, which is still packed:
h Avoid strong transportation vibrations and severe hits, e.g. when setting down.
h Check, if transportation damages are visible!
If so:
h Immediately complain to the deliverer. Let the claim be confirmed in writing and imme-
diately contact the substitution of Baumüller Nürnberg GmbH, which is in charge for
your company.
WARNING
The following may occur, if you disregard these safety notes:
m serious personal injury m death
The danger is: electricity.
Do not operate the device, if you have recognized a transportation damage or if you assume
this. In this case immediately contact Baumüller Nürnberg GmbH
To Next Page
Loading...