Fundamental safety instructions
Manual b maXX
®
BM1000
Document No. 5.07003.04
17
of 174
2
2.4 Legal instructions
This documentation is addressed to technical qualified personnel, who is specifically
skilled and who is thoroughly familiar with all warnings and maintenance procedures.
The devices are made according to the state-of-the-art technology and are fail-safe. They
can be installed safe, can be put into operation and they function without problems, if it is
assured, that the instructions of the documentation are followed.
The user is responsible for the execution of service and commissioning according to the
safety instructions of the prevailing standards and other relevant national and local in
-
structions concerning conductor dimensioning and protection, earthing, disconnector,
overcurrent protection and so on.
For damages, which result from the mounting or from the connection, the one is liable,
who has carried out the mounting or the installation.
2.5 Appropriate use
Always use the device according to the terms. Stated below we have carried a few impor-
tant notes together. The notes stated below shall give you a feeling for the according to
the terms usage of the device. We do not raise any claim for the completion of the notes
stated below - follow all instructions given in this operating instruction.
m project the application in such a way, that you always operate the device within its
specification.
m use this device only as converter for drives.
m make sure, that only qualified personnel work with/at this device.
m install this device only on an adequate carrying wall.
m install this device in the way as it is described in the documentation.
m make sure, that the mains/power supply unit always applies to the predetermined
specifications.
m only operate the device, if it is technical faultlessly.
m operate this device only in combination with released components of the company
Baumüller Nürnberg GmbH.
m always operate the device in an area as it is instructed in the „Technical data“.
m always operate the device in serialized condition.
Due to safety reasons you must not rebuild the device.
m consider all instructions referring to this, if you intend to store the device.
You are using the device according to the terms, as soon as you regard all notes and in-
formation in this operating manual.
To Next Page
Loading...
