Technical data
Manual b maXX
®
BM1000
Document No. 5.07003.04
145
of 174
D
Operation functions Built-in PLC, AVR, accel/decel S-curve, over-voltage/over-cur-
rent stall prevention, 5 fault records, reverse inhibition, momen-
tary power loss restart, DC braking, auto torque/slip
compensation, auto tuning, adjustable carrier frequency, output
frequency limits, parameter lock/reset, vector control, PID con
-
trol, external counter, MODBUS communication, abnormal
reset, abnormal re-start, power-saving, fan control, sleep/wake
frequency, 1st/2nd frequency source selections, 1st/2nd fre
-
quency source combination, NPN/PNP selection
Protection functions Over voltage, over current, under voltage, external fault, over-
load, ground fault, overheating, electronic thermal, IGBT short
circuit, PTC
Display keypad 6-key, 7-segment LED with 4-digits, 5 status LEDs, master fre-
quency, output frequency, output current, custom units, parame-
ter values for setup and lock, faults, RUN, STOP, RESET, FWD/
REV, PLC
Approvals
To Next Page
Loading...
