Belarus 820 - Page 156

80-0000010B OM
156
- 13.6-20 (13.6R20 or 360/70R20) – front tyres, in complete set with rear tyres
16.9R30;
Note – Tyres 11.2R24 and 11.2R42 (9.5-42) are mounted for tractor operation in
spaces between rows of beetroot 450 mm on the track 1800.
When using tyres 15.5R38 and 11.2R42 with loads, exceeding their load capacity,
wheel twinning should be used.
Tyres 9.5-42 shall be used only in twin version.
Contact your dealer for additional advice on twin tyres application.
Parameters of tyres used on tractors “BELARUS-80.1/82.1/820”, are given in table
3.11.1.
Table 3.11.1 – Parameters of tyres
Dimension type Tyre section, mm Tyre rolling radius, mm
1)
7.5-20 205
—
11.2-20 284
—
360/70R24 357
—
360/70R20 357
—
9.00R20 234
—
13.6-20(13.6R20) 345
—
11.2R24 284
—
15.5R38 394 750
18.4R34(F-11) 467 770
18.4R30 467 734
16.9R38 429 800
16.9R30 429 698
9.5-42 241 730
11.2R42 284 749
18.4/78-30
(18.4L-30)
470 720
_________________________________________________________________________________
1)
In this section only rear tyre rolling radii are given, which are necessary for
tachospeedometer speed programming as it is specified in subsection 3.18.3 and
3.18.4 “Programming order of tachospeedometer of dashboard with molded panel”.
The rules of tyres operation, selection of optimal tyre inner pressure depending on
the operating conditions and loads on tractor axles, as well as methods of track setting are
given in subsection 4.2. “Tractor use”