164
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA JANUARY 2003
AIRFRAME FEATURES
STEPS AND GRIPS
Access to the top of the helicopter is quick
and easy with the steps and grips provided
on both sides of the fuselage. All the steps
are coated with a non-slip material for
secure footing.
The work platforms located on the cabin
roof, and the wing surfaces allow rapid and
easy completion of the pilots' preflight
inspection.
WORK PLATFORMS
To Next Page
Loading...
