EasyManua.ls Logo

BELL HELICOPTER BELL 430 - CREW COMPARTMENT; Document Stowage; full perimeter sealing; keyed lock

Default Icon
276 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA JANUARY 2003
Access to the crew compartment is provided on either side through large doors which
are hinged at the forward edge. The doors are secured by a three-point / dual-action
latching system and feature full perimeter sealing against wind noise or water leaks.
A hinged metal strap, with a strong spring action , is mounted on the bottom edge of the
door to hold it in the open position. The external door handles are flush-mounted,
spring-loaded levers, which are easy to grasp and turn. The internal handles are of the
lift-up type, with an adjacent hinged assist handle. A common keyed lock is shared
with the cabin/baggage doors.
DOCUMENT STOWAGE
Provisions for stowage of documents /
equipment during flight are included. The
following list of stowage requirements are
provided for: Operators Manual, Maps,
Approach Plates / Airport Directories, Flight
Computer / Portable GPS. Additionally,
provisions for the aircraft log book are
available.
CREW COMPARTMENT

Table of Contents

Related product manuals