189
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA JANUARY 2003
COPILOT BRAKES
NO. 222-706-014-XXX
The Copilot Brakes Kit provides differential braking control of the wheel landing gear
at the copilot station when the Dual Control Kit is installed. The copilot brakes operate
in exactly the same manner as the pilots'. They consist of a set of hydraulic cylinders
mounted to the copilot directional control pedals, and the plumbing necessary to connect
to the braking system hydraulic lines.
The weight increase with the copilot brakes installed is 1.8 kilograms (4 pounds).
To Next Page
Loading...
