BELL HELICOPTER BELL 430 - SPECIFICATION SUMMARY; ENGLISH SKID GEAR SPECIFICATIONS

256
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA JANUARY 2003
DESIGN SPECIFICATIONS
METRIC ENGLISH
MAIN ROTOR
Number of Blades 4 4
Diameter 12.8 meters 42 feet
Chord 36.1 centimeters 14.2 inches
RPM (100%) 348 348
TAIL ROTOR
Number of Blades 2 2
Diameter 2.1 meters 6.9 feet
Chord 25.4 centimeters 10 inches
RPM (100%) 1881 1881
ENGINES-TWO ROLLS-ROYCE 250-C40B ( Engine Rated Shaft Horsepower )
Twin Engine Power (Each)
5 Minute 557 kW 747 SHP
Maximum Continuous 461 kW 618 SHP
Single Engine Power
30 Second 629 kW 844 SHP
2 Minute 605 kW 811 SHP
30 Minute 588 kW 789 SHP
TRANSMISSION RATINGS (@100%RPM)
5 Minute @ Main Rotor Mast 779 kW 1045 SHP
MCP @ Main Rotor Mast 738 kW 989 SHP
Single Engine @ Input
30 Second 629 kW 844 SHP
2 Minute 605 kW 811 SHP
Continuous 532 kW 714 SHP