210
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA JANUARY 2003
KING GOLD CROWN III PROVISIONS
The wiring provision kit for King Gold Crown III equipment provides a standard harness
assembly which will accommodate all the factory option
King communication and
navigation avionics, instruments and displays. The benefits of a complete provision kit
are future flexibility in installation or removal of some avionics without extensive
modifications to the existing configuration, minimum
electromagnetic compatibility
interference, and optimum antenna location / energy radiation pattern / reception.
The provisions include all
wiring, connectors, and mounting provisions (space and
dedicated fasteners for component mount/ racks), along with the provisions for
circuit
breakers, switches, and required controls.
NOTE: THE INSTALLED WEIGHT OF THE
KING GOLD CROWN III HARNESS VARIES
DEPENDING ON IFR CONFIGURATION [E/M
INSTRUMENTS OR EFIS]
To Next Page
Loading...
