30
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA JANUARY 2003
STANDARD SEATING
The nine place[ seven cabin seat ]utility interior is standard. There are three rows
of cabin passenger seats,
one aft row of three, and two rows of two (one intermediate
and one forward). The
lightweight folding seats with high backs and individual lap
belts / shoulder harnesses meet the latest FAR specifications for occupant restraint.
The seats are comfortably upholstered in flame retardant fabric, and feature advanced
ergonomic design.
The seats are secured to the floor of the cabin with quick-release / positive locking
ring-on-stud type fasteners. They are easily removed in only moments to convert the
cabin for carriage of large or bulky cargo. The average weight for each two seat module
is 15.9 kilograms (35 pounds). The average weight for each individual rear row seat
is 6.8 kilograms (15 pounds). The total weight of the standard seating is 49.3 kilograms
(108.6 pounds).
FLOOR FITTING
To Next Page
Loading...
