263
THIS IS AN UNCONTROLLED DOCUMENT.
THIS ELECTRONIC DOCUMENT MAY HAVE BEEN SUPERCEDED.
THE MOST CURRENT DOCUMENT INFORMATION IS AVAILABLE
FROM YOUR BELL HELICOPTER TEXTRON REPRESENTATIVE.
PRODUCT DATA JANUARY 2003
OPTIONAL ACCESSORIES (continued)
Specifications subject to change without notice.
Part Number Kit Description Wt (lbs) Wt (Kg) Notes
INTERIOR (continued)
430-706-022-101 STANDARD SOUNDPROOFING 80.1 36.3
(7
430-706-022-103 STANDARD SOUNDPROOFING W/O AUX. FUEL 14.9 6.8
(7
430-706-022-105 STANDARD SOUNDPROOFING W/ AUX. FUEL 15.2 6.9
(7
430-706-021-101
CORPORATE SOUNDPROOFING
75.0 34.0
(7
430-706-021-103
CORPORATE SOUNDPROOFING W/O AUX FUEL
14.8 6.7
(7
430-706-021-105
CORPORATE SOUNDPROOFING W/ AUX. FUEL
15.2 6.9
(7
PAINT
HIGH VISIBILITY
MARKINGS FOR HIGH VIS. M/R BLADES (WHITE & ORANGE)
0.0 0.0
(8
STC's
EQUI PM EN T
WPSP
WIRE STRIKE -
RECOMMENDED KIT - SEE NOTE 23.4 10.6 (9
Credits
INTERIOR
230-705-710-103 UPHOLSTERED NINE PLACE UTIL SEATS -108.6 -49.3
430-705-800-105 STANDARD UTILITY INTERIOR -89.3 -40.5
430-705-800-107 STANDARD UTILITY INTERIOR - LITTER -89.3 -40.5
PAINT
NO EXTERIOR NO EXTERIOR PAINT -35.0 -15.9
WHITE WHITE PAINT ONLY 0.0 0.0
Notes: All Equipment Kits require Provision Kits prior to installation
3) PRODUCTION OPTION, NOT A KIT.
8) Rework of standard blades is required to incorporate this feature.
1) Price and / or Weight includes credit for basic ship hardware removed.
(90.8 kg).
4) VNE Computer & Horn is REQUIRED for ALL Category A Operations; The Second Landing Light is REQUIRED for ANY
NIGHT Category A Operation; Additional Cat A equipment and crew requirements are specified in the Instrument Flight
Rules & AFCS Configurations Pages (immediately following).
5) The External Life Raft Kit is ONLY compatible with the ALL forward facing cabin seating configurations (the 9 place utility
configurations, with or without folding seatbacks, or the 10 place utility configuration with folding seatbacks). NOT compatible
with the External Rescue Hoist.
6) When the Hoist Equipment is installed, the forward facing two place modules of basic seating must be located on the
opposite side of the cabin from the hoist (left). If high density seating is installed, the center forward facing three place
module must be removed. Standard or High Skid Landing Gear REQUIRES the Skid Cable Guard.
7) Standard Soundproofing is not included in t he Std. Config. Weight, but is installed in ALL ships, at no charge, unless customer
requests deletion. Complete installation of either S tandard or (optional at extra cost) Corporate Soundproofing requires a -101 kit plus
either a -103 or -105 kit.
9) The Wire Strike Kit is a RECOMMENDED extra cost option. The customer must specify on the Purchase Agreement for
the WSPS Kit NOT to be installed.
To Next Page
Loading...
