Balance
To balance forward and reverse stitches.
Balance BERNINA Dual Transport
Adjusting the feed of the upper fabric layer.
Permanent reverse sewing
The sewing computer sews the selected stitch pattern
in reverse.
Backstepping
The last 200 needle penetrations of a stitch pattern are
retraced, i.e. sewn backwards.
Distorting stitch patterns
⦁
touch the icon
⦁
touch the upper «+» or «-» icon or turn the stitch width knob
to the right or to the left
►
the stitch pattern will be distorted in 0.01 mm steps to the
right or to the left
⦁
touch the lower «+» or «-» icon or turn the stitch length knob
to the right or to the left
►
the stitch pattern will be distorted in 0.01 mm steps forwards
or backwards
Personal memory permanent
⦁
select a stitch pattern and alter e.g. stitch length or
stitch width
⦁
touch the icon
►
the altered stitch pattern is saved
Reset
⦁
touch the icon
►
any alterations of the selected stitch pattern are
reset to basic setting
To Next Page
Loading...
