!
Biodex Medical Systems, Inc. © 2016 61
6. Once all fields have been entered, touch <Save Data> to save the new Sealed Source entry.
Touch <Back> to return to the Sealed Source List and verify that the new source is now
listed.
To Edit A Sealed Source:
1. At the Sealed Sources List screen, touch to highlight the isotope to edit.
2. Touch <edit>. The Sealed Sources Setup screen is now displayed.
3. Touch to highlight each field to edit on the Sealed Source Setup screen.
4. Make the appropriate edits, touching <Enter> to save each one. When edits to all fields to
which changes are desired, touch <Save Data>. The system saves the changes made and
displays a note stating that sealed source changes have been saved.
5. Touch <Back> to return to the Sealed Source List.
To Delete A Sealed Source:
1. At the Sealed Sources List screen, touch to highlight the sealed source to delete.
2. Touch <Delete>. The system will note that the sealed source selected will be deleted and
prompt "Are you sure?"
3. Touch <OK> to delete the sealed source selected and return to the Sealed Source List, or
<Cancel> to abort the deletion and return to the Sealed Source List without making
changes.
To Mark A Sealed Source As Default:
1. At the Sealed Sources List screen, touch to highlight any listed sealed source and then touch
<Mark as Default> to mark it as the default. The default symbol (>>) will now show to the
left of the selected sealed source denoting that it has been marked as the default. This will
be the first source displayed when you enter the constancy and accuracy screens.
2. Touch <Back> to return to the Dose Calibrator Configuration screen.
To Print A List Of Sealed Sources:
1. At the Sealed Sources List screen, touch <Print>. The entire Technologist List will print to
the currently selected printer.
2. Touch <Back> to return to the Sealed Source List.
To Next Page
Loading...
