P1 Patient Monitor User’s Manual
10-11
Hemoglobin readings can be obtained: arterial and venous. To set the SpHb mode, follow
these procedures:
1.
Select the SpO
2
parameter area or waveform area to enter the【SpO
2
】menu.
2.
Select【SpO
2
Setup】submenu.
3.
Select【Arterial】or【Venous】.
10.7.10.6. Setting SpHb Average
To set the SpHb average time, follow these procedures:
1.
Select the SpO
2
parameter area or waveform area to enter the【SpO
2
】menu.
2.
Select【SpO
2
Setup】submenu.
3.
Set 【SpHb Average Time】.
10.7.10.7. Setting SpHb Precision
To set the SpHb precision, follow these procedures:
1.
Select the SpO
2
parameter area or waveform area to enter the【SpO
2
】menu.
2.
Select【SpO
2
Setup】submenu.
3.
Set 【SpHb Precision】 as required.
10.7.10.8. Setting SpHb Unit
To set the SpHb unit, follow these procedures:
1.
Select the SpO
2
parameter area or waveform area to enter the【SpO
2
】menu.
2.
Select【SpO
2
Setup】submenu.
3.
Set 【SpHb Unit】.
10.7.10.9. Setting Waveform Mode
To set the SpHb unit, follow these procedures:
1.
Select the SpO
2
parameter area or waveform area to enter the【SpO
2
】menu.
2.
Select【SpO
2
Setup】submenu.
3.
Select 【Wave Mode】 as required, and select whether the SpO
2
waveforme
contains respiratory or not.
To Next Page
Loading...