P1 Patient Monitor User’s Manual
17-6
CAUTION:
You can only set the patient information displays on the 【ECG Report】from
the ECG Report page. Patient information set in the 【Report Layout】page is
not displayed ECG reports.
17.3.2.2. Setting Patient Information on Other Reports
You can set the patient information on ECG reports by the following steps:
1. Select 【 Main Menu 】 quick keyfrom 【 System 】 column to select
【Maintenance】input maintenance passwordEnter.
2. Select 【Print】【Report Layout】.
3. Select desired items under 【Report Name】. 【N/A】indicates that the item
is not displayed on the report.
17.3.3. Manually Printing Report
You can print a report manually.
17.3.3.1. Starting printing from the current page
Click 【Print】 button below the current page (such as the Review Page) to start
printing.
17.3.3.2. Printing Realtime Report
You can select 【Realtime Report】 on 【Report Setup】 page to print. For more
information, refer to 17.3.3.2 Printing Normal Report.
17.3.3.3. Printing Normal Report
The normal report contains the following types of reports:
ECG Report
Realtime Report
Tabular Trends Report
Graphic Trend Report
To print normal report, follow below steps:
To Next Page
Loading...