Biolight Meditech P1 - Page 213

P1 Patient Monitor User’s Manual
17-10

Interval Select the resolution of the
tabular trends printed on a
report.
【NIBP】、【EWS】、【GCS】：at an
interval of acquiring the values of selected
parameter.
【Auto】：using the 【Interval】 setting
of the【Tabular Trends】 review page.
17.3.5.4. Setting Graphic Trends Reports
1. Select【Main Menu】quick keyfrom【Report】column to select【Report
Setup】.
2. Select 【Graphic Trends Report】.
3. Set the desired options.
17.3.5.5. Setting the Second Mark Switch
To set if a second mark displays on the printed reports, follow this procedure:
1. Select 【 Main Menu 】 quick keyfrom 【 System 】 column to select
【Maintenance】input maintenance passwordEnter.
2. Select 【Print】submenu【Other】 submenu.
3. Switch on or off 【Second Mark (Print)】 switch.