Biolight Meditech P1 - Page 68

P1 Patient Monitor User’s Manual
6-11

data and SpO
2
statistics time.
6.7.4.1. Selecting SpO
2
parameter
When monitoring the patient using two SpO
2
, you can set the SpO
2
parameters you
want to display in the following ways:
1. Select to enter the 【SpO
2
Screen Setting】 menu.
2. Select 【Setup】 menu.
3. Set the 【SpO
2
】 to 【SpO
2
】 or 【SpO
2
L】.
6.7.4.2. Selecting Temp parameter
When monitoring the patient using multiple temp modules, you can set the Temp
parameters you want to display in the following ways:
1. Select to enter the 【SpO
2
Screen Setting】 menu.
2. Select 【Setup】 menu.
3. Set the 【Temp】.
6.7.4.3. Setting the interval of trend data
You can set the interval of trend data by following ways:
1. Select to enter the 【SpO
2
Screen Setting】 menu.
2. Select 【Setup】 menu.
3. Set the 【Trend Interval】.
6.7.4.4. Setting the SpO
2
statistics time
You can set the SpO
2
statistics time by following ways:
1. Select to enter the 【SpO
2
Screen Setting】 menu.
2. Select 【Setup】 menu.
3. Set the 【Statistics Duration】.