Amplifier Control Panel
Double clicking with the left mouse button on an amplifier gets you to the Amplifier Control Panel, which provides
access to the most important controls and indications of the selected amplifier.
Simultaneously opening several Amplifier Control Panels and placing them in any order on the computer screen is
possible as well. For dragging the panel windows around, please use the left mouse button and click on the title bar at
the top of the window. Keep the mouse button pressed while dragging the panel.
Element
Description
Amplifier Type
(generated during amplifier selection or read from the amp while being on-line)
Using the left mouse button, click on the Close button to close the Amplifier Control Panel.
A name can be assigned to each amplifier to specify its use or position. Click on the gray-shaded
entry field below the Amplifier Type field and enter the desired name. Press Return on the keyboard
to acknowledge the entered name.
HINT: Entering amplifier names is also possible with in the Setup & Control Panel on the Config &
Info page.
IRIS-Net REMOTE AMPLIFIER | en 107
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
