Element Description
Start with last loaded Project Specifies whether the last opened project shall be reopened when IRIS-Net is
launched.
Display Username on Login Specifies whether the user name has to be entered in addition to the
password when opening protected project files.
User Login and Logout Specifies whether user logins and logouts shall be recorded in the event log.
Going Online or Offline Specifies whether going on-line or off-line shall be recorded in the event log.
Project Change Specifies whether loading another project shall be recorded in the event log.
Application Start Specifies whether launching IRIS-Net shall be recorded in the event log.
Startup Layer for current project Specifies the layer that is shown when the project file is opened.
Active Layer after IRIS-Net
Screensaver
Specifies the layer that is shown after the screensaver has been activated.
Using the SPL Calculator
The SPL Calculator provides information about the theoretical SPL resulting from given equipment and given distance
between speaker system and sound reinforcement destination. The calculations are based on the theoretically ideal
coupling of the single components. Since in practical use several other influences and parameters add to the actually
achieved SPL, the results of this computation only represent an approximation.
Selecting ”SPL Calculator” in the Tools Selecting Menu provides access to the SPL Calculator.
IRIS-Net IRIS-Net | en 47
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
