Using the Scene Editor
A Scene consists of a freely configurable number of actions. Examples for actions that can be part of a Scene are: DSP
parameters, GPIO settings, remote amplifier parameters or the loading of presets.
Element Description
This creates a new Scene. Creating a new Scene closes the currently opened Scene. A window
opens requesting the user to acknowledge this step: "Do you want to save your changes?"
Button Yes: Saves the currently opened Scene. In case the currently opened Scene already has
a name and has previously been saved, the Scene is simply overwritten. The “Save as…” dialog
window opens when a Scene has not been saved before. This window allows assigning a name
to a Scene.
Button No: Changes applied to a Scene are not being saved.
Button Cancel: Cancels the creation of a new Scene.
Creates a new entry in a Scene.
Deletes the currently marked entries of a Scene.
Lets the user edit the column-entry Action of the selected Scene entry by opening the
Operation dialog.
Lets the user edit the column-entry Parameter of the selected Scene entry by opening the
Object Parameter dialog.
Adds a comment line to a Scene.
Copying or Pasting in a single or various Scene entries.
Action that is being executed when recalling a Scene.
Parameter of an action that is being executed when recalling a Scene.
Loads a previously saved Scene.
IRIS-Net IRIS-Net | en 64
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
