Starting immediately from the beginning of the Period of Time, the Condition is
recurringly "true" every x week(s) during the Duration.
Starting immediately from the beginning of the Period of Time, the Condition is
"true" for the Duration, if the first day of the Period of Time falls on the selected
weekday. Otherwise, starting from the beginning of the Period of Time, the
Condition is "true" on every selected x weekday(s) at start time of the Period of Time
and for the Duration.
Starting immediately from the beginning of the Period of Time, the Condition is
recurringly "true" every x month(s) during the Duration.
Starting immediately from the beginning of the Period of Time, the Condition is
recurringly "true" every x year(s) during the Duration.
Starting immediately from the beginning of the Period of Time, the Condition is
"true" for the Duration, if the first day of the Period of Time falls on the selected x
weekday of a month. Otherwise, starting from the beginning of the Period of Time,
the Condition is "true" on every selected x weekday(s) of a month at start time of the
Period of Time and for the Duration.
Starting immediately from the beginning of the Period of Time, the Condition is
"true" for the Duration, if the first day of the Period of Time falls on the selected x
weekday of a month. Otherwise, starting from the beginning of the Period of Time,
the Condition is "true" on every selected x last weekday(s) of a month at start time
of the Period of Time and for the Duration.
The Period of Time has a start time (start time on a start day) and an end time (end
time on an end day). Within this Period of Time the Condition is once or periodically
"true" for the Duration.
The Duration during which the Condition shall be "true" at one point in time or at
numerous points in time. The syntax for entering the Duration is: week (w), days (d),
hours (h), minutes (m), and seconds (s). Values have to be separated by the letters
indicated in parentheses.
Example:
A Condition shall be "true" for a time span of 90 minutes. Some of the allowable
syntaxes for entering the Duration are: 0w0d1h30m0s; 1h30m; 90m; 89m60s
For a Condition that is periodically "true" on specific weekdays, the desired
weekday(s) can be selected. The List of Weekdays is displayed only if one of the
following types of Conditions has been activated:
selected weekday,
selected weekday in month or
last selected weekday in month
IRIS-Net IRIS-Net | en 63
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
