Element
Description
This field is for entering the speaker cabinet’s average nominal SPL (see
data sheet).
Enter the power output of the amplifier in this field. Since the amp’s
actual outputted power depends on the impedance of the load connected,
the entered value has to match the load that is actually connected.
Distance between the cabinet’s grille and the aimed destination of the
sound reinforcement.
Enter the number of speaker cabinets.
Clicking this soft key starts the calculation.
This field shows the resulting SPL in dB.
Clicking onto this button closes the SPL Calculator.
Limiter Threshold Calculator
The Limiter Threshold Calculator provides information about the limiter threshold to be set for given equipment and
given loudspeaker systems data. The Limiter Threshold Calculator makes no claim to be pinpoint accurate; i.e. results
should be regarded as benchmarks.
Selecting the entry Limiter Threshold Calculator in the Tools menu provides access to the Limiter Threshold Calculator.
IRIS-Net IRIS-Net | en 48
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
