After a reboot of the device you can connect via Telnet.
Event Logging
The Event Logging page allows specifying which types of events will be written to the Log File.
– Problems (errors) that occurred in the NetMax system and
– System status or change in state messages are referred to as events. Event types can be selected in two different
ways: by event level or by event facility, where the latter describes a specific system part of the N8000.
Event Levels
IRIS-Net DIGITAL MATRIX | en 504
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page