Master Fault: A condition can depend on a selected internal N8000 error. The conditions result is true (or false when
choosing Invert Condition instead) if one or various errors of the selected type occur.
Example:
The screenshot on the left shows the condition "EInterface". The conditions result is true whenever a fault is
recognized on the N8000 interface. The following types of errors are available to select from: CobraNet, CAN Bus, GPI
and RS-232 interface.
IRIS-Net
DIGITAL MATRIX | en 509
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page