Paging Line: Connecting the N8000 to a ProMatrix/ProAnnounce DPM 4000 allows setting nodes of a N8000’s paging
matrix from the DPM4000. Therefore, it is necessary to select the macro’s Parameters Object ID, Object Index and
Paging Lines.
Save Amplifier Preset: The current settings of the selected amps are stored in a selected User Preset. Amps specified
in the amplifier list as „Amplifier X“ represent remote amps with CAN address „X“ that are connected to the CAN bus.
IRIS-Net
DIGITAL MATRIX | en 518
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
