Bosch IRIS-Net - Page 741

63 Hz, 250
Hz, 1
kHz, 4 kHz,
16 kHz
20 Hz to 20 kHz FREQ (frequency) sets the center frequency of a parametric
EQ or the cut-off frequency of shelving and Hi / Lo pass
filters.
1.9 Oct or
0.7
0.01 to 6.67 Oct.
or
0.1 to 40 (PEQ)
0.1 to 2.0 (Hi-/
Lopass)
Q or BW defines the quality or bandwidth of a parametric EQ.
A high Q-value results in a narrowband filter, while a small Q-
value results in a broadband filter. The Q-value also sets the
quality and thus the response of Hi, Lo and All pass filters
with slopes of 12dB/ oct.
6dB/Oct 6dB/Oct,
12dB/Oct
SLOPE sets the steepness or filter-order of low or high
shelving equalizers and low or high pass filters. Setting
different slopes within the transmission range is possible.
That, in conjunction with the Q-parameter, offers the
possibility for a hi-pass filter to be programmed for B6-
alignment, which describes a drastic rise in the cut-off
frequency range.
BYPASS switches the corresponding filter ON (not engaged)
or OFF (engaged), which allows for quick A / B-evaluation of
the actual effect that a filter has on the sound.
IRIS-Net
PROMATRIX 8000 | en 741
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956