2. Disable possibility to change baud rate The option Baud rate freeze allows the protection of the amplifier from a
(unintended) baud rate change. For activating this option select "Modify Properties" from the amplifiers context
menu in IRIS-Net. Change the value of property Baud rate freeze from 0 to 1. If Baud rate freeze is activated, the
baud rate can be changed neither via Address-Switch nor via IRIS-Net. For changing baud rate you have to
deactivate Baud rate freeze.
Caution!
The option Baud rate freeze must be used carefully. Activate Baud rate freeze of a amplifier only if
all amplifiers at a CAN network have the same baud rate and the baud rate will not be changed in
the future.
Consequences
IRIS-Net IRIS-Net | en 76
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
