Bosch IRIS-Net User Manual

Element Description
CAN INTERFACE
CAN BAUD RATE Transmission rate of the CAN-Bus. All devices on the CAN-Bus must be set to one
common transmission rate.
HINT: Editing the CAN BAUD RATE setting is possible in offline mode only.
CAN STATE Displays the current CAN-Bus status. Possible indications are: BUS OK, Bus
Heavy, Bus Off.
CAN DEVICE LIST Opens the dialog box for configuring the connected devices.
OPEN INTERFACE
ENABLE Set the checkbox to activate the ASCII control protocol of the DPM.
PASSWORD If password protection of the ASCII control protocol is required, enter the
password here. Repeat the password in the CONFIRM
PASSWORD field. Go online (write) to set the password in the DPM.
HINT: Editing the password setting is possible in offline mode only.
TCP Port TCP port of the ASCII control protocol. The default port is 6273.
IRIS-Net PROMATRIX 8000 | en 770
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956

Bosch IRIS-Net Specifications

General

Brand	Bosch
Model	IRIS-Net
Category	Security System
Language	English