Element Description
The current condition of each type of error gets indicated. Green means no error, red
indicates that an error has been detected.
At the occurrence of a type of error for which the checkbox DETECT is ticked, the
COLLECTED ERROR STATE flag is set at the same time and the FAULT-LED at the DPA front
panel lights. Additionally the ready relays changes to „not operational“ state.
DEVICE LOST The CAN bus connection between DPM and DPA is broken.
AMPLIFIER MODEL Amplifier type in IRIS-Net and actually connected hardware do not match.
MEMORY/DATA Memory or Read/Write error.
IRIS-Net PROMATRIX 8000 | en 823
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
