Bosch IRIS-Net - Page 830

Name of the relay
CAUTION: Using * (asterisk) and/or = (equal) signs in a name is not permissible.
State of the relay during a RESET of the DCS system. The DCS system is reset for example
after changing the configuration or after a power outage.
State of the relay in error condition. Detailed information about the "error condition" of a DCS
system is provided in the description of the DCS 801R module.
DCS 409R LINE / AF RELAY MODULE
The DCS 409R module offers relay-switching contacts for the switching of (line level)
audio signals or other control functions.
Element
Description
Name of the module
CAUTION: Using * (asterisk) and/or = (equal) signs in a name is not permissible.
Name of the relay
CAUTION: Using * (asterisk) and/or = (equal) signs in a name is not permissible.
State of the relay during a RESET of the DCS system. The DCS system is reset for example
after changing the configuration or after a power outage.
State of the relay in error condition. Detailed information about the "error condition" of a DCS
system is provided in the description of the DCS 801R module.
IRIS-Net
PROMATRIX 8000 | en 830
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956