Brady label maker User Manual

Working with Objects ¡ 7-23
Use the arrow buttons to step through thumbnail versions of the
graphics offered in the category shown. Each time you press a scroll
button, you’ll see six (or fewer, depending on how many graphics are
available in the category) new thumbnail graphics.
4. Select the thumbnail button that displays the graphic you want to
add to your label.
5. Click OK. The system adds the graphic object to your label.
To change graphics categories
1. Choose Change Category on the Graphics screen. You’ll see the
Graphic Categories screen (Figure 7-12 on page 7-22) again, which
lists all categories offered in your system.
2. Choose a category from the list and press OK. The Graphics screen
displays again, this time displaying thumbnail versions of graphics
from the new category you selected.
Adding HotShapes
HotShapes are pre-defined designs you can print on your label. If you
have the Color & Cut system, your printer can automatically cut out
these shapes. See CHAPTER 10: Working with Cut-outs, for more
information.

Brady label maker Specifications

General

Brand	Brady
Model	label maker
Category	Label Maker
Language	English