8-6
¡
Applying Color to Objects
Note: You may not change the colors of a multi-color graphic object
supplied by the system. You may, however, change the entire
color of a single-color graphic.
The Object Color screen differs according to your system and the
ribbon you have installed.
Choosing color on the Monocolor system
When you have the Monocolor system, if you select an object and choose
the Color option, the Object Color screen displays, similar to the one
shown here:
Figure 8-1. The Object Color screen for the Monocolor system.
In Figure 8-1, the installed ribbon is a continuous color ribbon, and the
installed tape is white.
When you click on one of the color boxes, the Current color field
displays a sample of that color, and tells you what part of your label will
print in that color.
Color boxes
To Next Page
Loading...
Need help?
General
