12-8
¡
Transferring Files from a PC
Transferring Files from a PC
Before you can transfer files to your label printing system, you must
install Microsoft ActiveSync
.
Installing ActiveSync
1. Place the ActiveSync CD in the CD-ROM drive of the PC.
2. Follow the instructions and prompts that display on your PC screen
for copying the driver files to your PC.
3. After ActiveSync copies the driver files to the hard drive of your PC,
the installation program prompts you to connect the device (the
“device” in this case is your label printing system) to the PC. Connect
the USB cable between your PC and your label printing system.
Important! For ActiveSync to automatically detect your label
printer, you must have the PC and the printer connected
by USB cable.
4. Put your system on line by following the instructions in Placing
Your System On Line on page 12-3.
To Next Page
Loading...
