Brady label maker - CHAPTER 10 Working with Cut-outs; About Cutting

¡ 10-1
If you have the Color & Cut system, read this chapter for
information about the cut out functions.
(If you have the Monocolor system or the Multicolor system, the
information in this chapter is not applicable to your system.)
This chapter defines and describes the capabilities of the plotter cutter
included in your system. Topics include:
 About cutting
 Creating cut out objects
 Cutting print objects
 Cutting frames
 Calibrating the cutter
Important! See Appendix B: Cutter Maintenance for
information about adjusting and replacing the plotter
cutter stylus, and for cleaning the plotter cutter stylus.
CHAPTER 10
Working with Cut-outs