Brady label maker User Manual

10-14 ¡ Calibrating the Cutter
3. Enter a value in the Horizontal (x) field. The value must be a
positive or negative whole number.
4. Enter a value in the Vertical (y) field. The value must be a positive
or negative whole number.
5. Choose OK.
Note: You must close down and restart your printer for new settings to
take effect.
Restoring default cutter calibration settings
To restore factory set calibration settings, you must re-enter the original
values on the Hardware tab. Your system ships with a label inside the
printer applied at the factory that lists those values.
To restore default calibration settings
1. Locate the factory-installed label on your machine.
2. On the Main Menu screen, select Setup.
3. On the System Setup screen, choose the Hardware tab.
4. Enter the original value in the Horizontal (x) field.
5. Enter the original value in the Vertical (y) field.
6. Choose OK.

Brady label maker Specifications

General

Brand	Brady
Model	label maker
Category	Label Maker
Language	English