Brady label maker User Manual

9-8 ¡ Managing Files
Note: When you open a saved file, you should be aware that the label
in the file may not match the size and color of currently installed
tape. When that is the case, the system displays the label with
the characteristics of the current tape. You may still proceed to
make changes, print, or perform any operations you can perform
in the Editor window.
To open a file from the Main Menu screen
1. Choose the Saved Files option. You’ll see the File Groups screen,
which lists all file groups you have previously saved:
Figure 9-5. The File Groups screen with memory card.
If you have a memory card attached, the File Groups screen lists
the file groups saved on the card also. Those groups are listed with
(card) shown after the group name.
If you have no files saved yet, the Group name list is blank, and the
Next button is disabled.
2. Choose the group in which you stored your file.
3. Press Next. (If you change your mind, press Cancel to return to the
Main Menu screen.)
Groups saved
on attached
memory card

Brady label maker Specifications

General

Brand	Brady
Model	label maker
Category	Label Maker
Language	English