Broadcom Brocade DCX 8510-4 Backbone User Manual

53-1002177-19 Hardware Installation Guide Brocade DCX 8510-4 Backbone Hardware Installation Guide
Copy the command output into a text file named "SANbefor.txt." After the device is restored to the fabric, this
information can be used to verify that no unintentional changes have occurred to the fabric.
switch:admin> nsshow
Enter Pid COS PortName NodeName TTL
<output truncated>
switch:admin> nsallshow
12 Nx_Ports in the Fabric
<output truncated>
switch:admin> switchshow
switchName: switch
<output truncated>
switch:admin> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
<output truncated>
switch:admin>
7. Enter licenseShow; then copy the command output into a text file named "licenseshow.txt."
switch:admin> licenseshow
S9bddb9SQbTAceeC:
Fabric license
eezeRRySff0fSe:
Remote Switch license
bzbzRcbcSc0c0SY:
Remote Fabric license
dSeR9RcSeeTfSAq:
Extended Fabric license
RyeSzRScycTzfT09:
Entry Fabric license
RyeSzRScycazfT0G:
Trunking license
RyeSzRScycS0fT09:
4 Domain Fabric license
8. Enter supportShow; then copy the command output into a text file named "spptshow.txt."
NOTE
The supportShow command has a very long output and time for completion. It may last 20 minutes or longer,
depending on the size of the SAN.
This command displays support information from groups of preselected Fabric OS and Linux commands. Groups
include os, exception, port, fabric, services, security, network, portlog, system, extend, filter, ficon, iswitch, asic_db,
fcip, ag, dce_hsl, and crypto. This provides a backup of all the information that might be required by Technical Support
and can be used after the device is restored to the fabric to verify that no unintentional changes have occurred to the
fabric.
switch:admin> supportshow
version: 7.4.0
<output truncated>
switch:admin>
53-1002177-19
144
Broadcom

Broadcom Brocade DCX 8510-4 Backbone Specifications

General

Brand	Broadcom
Model	Brocade DCX 8510-4 Backbone
Category	Network Hardware
Language	English