Broadcom Brocade DCX 8510-4 Backbone - Page 24

53-1002177-19 Hardware Installation Guide Brocade DCX 8510-4 Backbone Hardware Installation Guide
–
Control processor blades (CP8)
–
Core switch blades (CR16-4)
–
Port blades, application blades, and encryption blades (included based on customer specification)
–
Blade slot filler panels (for slots not filled by blades)
–
Airflow Diversion and Port Side Exhaust Kit (included based on customer specification)
–
WWN cards
–
WWN bezel (logo plate)
–
Power supplies
–
Power supply filler panel (included if there is only one power supply)
–
Blower assemblies
–
Cable management finger assemblies
–
Chassis door
•
Accessory kit containing the following items:
–
A QuickStart Guide
–
ESD grounding strap
–
USB device
–
RS-232 serial cable. The RS-232 cable has an adapter at one end that can be removed to provide an RJ-45 style
connector.
•
Rack mount kit (as ordered) with instructions
Order the Brocade-branded optical transceivers (SFP+, mSFP, and QSFP). The device supports SWL, LWL, and ELWL
transceivers. The mSFPs and QSFPs are SWL transceivers only.
NOTE
For information about the SFP+, mSFP, and QSFP transceivers that are qualified for the device, refer to
Transceiver removal and replacement.
53-1002177-19
24
Broadcom