BRP EVINRUDE E-TEC E90DSLAA Series - Page 258

258
MIDSECTION
STERN BRACKET, 75 – 90 HP POWER TILT
Remove the tilt limit switch and retainer from the
swivel bracket.
Disconnect the trail lock spring and remove it from
the swivel bracket. Remove trail arm retainer.
Remove the trail lock arm and bushings from the
swivel bracket.
Remove the two trim rod rollers from the swivel
bracket.
Remove the tilt support and bushing from the
swivel bracket and inspect the detent roller and
spring.
1. Tilt limit switch
2. Retainer
30758
1. Trail lock spring
2. Trail arm retainer
30756
1. Trail lock bushing 30755
2
1
1
2
1
1. Trim rod roller 30754
1. Tilt support bushing 30753
1
1