275
MIDSECTION
TILLER HANDLE SERVICE – LONG HANDLE
11
Remove the electrical cover.
Disconnect the electrical harness coming from the
tiller handle.
Remove shift and throttle cables and wire harness
from grommet in lower engine cover.
Remove locknuts from screws on top of steering
arm.
Remove the screws attaching tiller bracket to
steering arm. Remove tiller bracket and handle.
Disassembly
Loosen throttle friction control so there is no
restriction on grip.
IMPORTANT: Do not back screw out com-
pletely. Nut is under spring tension.
Remove seven screws and bottom cover of tiller
handle.
1. Electrical cover 002084
1. Electrical harness connectors 001999
1. Screw 006362
1. Screw 006361
1. Throttle friction control 006711
1. Cover screw 006566
To Next Page
Loading...
Need help?
General
