Communication Protocols for the Thermoprinter V3.1
Installation Manual Version 001 BRUKER 117 (167)
Label Handling 12.2.2
When placing the barcode label onto the collar of the sample, make sure the label
is fastened correctly. The label should be fixed parallel on the collar, with no over-
hang and no fold over.
To remove the label from the collar, lay the collar for a short time in methanol or a
similar solvent.
Switch 2: Rotary Switch
fFor
7 Baud Rate
Switch 3: XX Open
X X Closed
1234
Switch 4: XXX Open
XXXXXClosed
12345678
To Next Page
Loading...