Bruker B-ACS 60 - 6 Operating Instructions; General; Front Panel Controls; Figure 6.1. Front Panel of Automatic Sample Change

Installation Manual Version 001 BRUKER 37 (167)
6
Operating
Instructions 6
General 6.1
In the present version, the B-ACS 60 Automatic Sample Changer can handle a
capacity of 60 samples for NMR measurements with superconducting magnets.
The B-ACS 120 can handle 120 samples. The Sample Changer is linked to the
host computer via a RS232 cable.
Front Panel Controls 6.1.1
The following controls are located on the front panel (figure 6.1):
1. LCD DISPLAY: Used for the current status and for error messages.
2. RESET: A push button for system initialization.
3. CONT: A push button for continuation after a failure occurs.
4. MAGAZINE MOTION: Push buttons for manual magazine motion.
Figure 6.1. Front Panel of Automatic Sample Change
Column
Assembly
LCD Display
Magazine Motion
CONT RESET