12 (167) BRUKER Installation Manual Version 001
Safety Considerations
hands and other objects away from the pinchers on the end of the vertical cyl-
inder.
2. On the front side of the upper column assembly. Warning: Keep hands and
other objects away from the path of the pneumatic arm and magazine belt (fig-
ure 4.7) during operation of the sample changer.
Extreme Temperatures 3.5
The sample warmer located on the magazine belt reaches extreme temperatures:
Warning: Do not insert your fingers into the sample warmer. When the sample
warmer is operating it can reach temperatures exceeding 70°C (figure 3.1).
Figure 3.1. Extreme Temperature Warning
Warning! Extreme Temperature! Do not
put your finger into the sample warmer!
!